The CARE WET-SENSE Incontinence Monitoring System is an incontinence alarm designed for use in long-term care settings. The system includes a control unit which is mounted on or near the bed and a thin, flexible sensor which is taped to the porous side of a bed pad or other absorbent item. The sensor is a flexible electronic circuit that is connected to the control unit by a cord. When moisture is absorbed by the bed pad, the sensor detects it, causing a bright red light to flash on the control
Chubb Enuresis Sensor is designed for use by individuals with Pelvic Organ Prolapse, cancer or neurological disorders. The sensor pad is placed between the user’s sheet and mattress. Ideally the sensor should be placed underneath a cotton top sheet and on top of any protective waterproof sheet. The shiny side of the sensor should be uppermost and the sensor should be placed where bed wetting is most likely to occur.
Dry Buddy is an incontinence alarm to train incontinent individuals. The DryBuddy approach allows the parent/caregiver and the child/client to sleep in the privacy and comfort of their own rooms. Caregivers may place an alarm anywhere in the patient's house where there is a standard electric socket. There are no distance limitations or limits to the number of alarms used inside the house. The sensor is completely wireless, so that there are no wires to entangle the patient, cause discomfort,
The Enuresis Switch, model 1102, is an incontinence alarm designed for use with children with incontinence. The sensor is placed in a potty or dry diaper and will reward controlled urination. When the sensor is wetted, the sensor activates the switch which, in turn, activates a connected toy or device. POWER: Uses two double-A batteries.
The Malem Wearable Enuresis Alarm is designed for users with incontinence disabilities. The device is designed to maximize success in the treatment and cure of bedwetting and provide a safe, efficient, economical and permanent cure for bedwetting. It is small lightweight unit that emits a tone and or vibrates when detecting moisture.
The Malem Wireless Bedwetting Alarm System is designed for users with incontinence disabilities. This comfortable, compact and light-weight alarm system can be used for geriatric incontinence management. It features transmitter magnetically clips to the underpants waistband, eight random sounds to prevent auditory accommodation, flashing LED, volume control and 25 meters long range.
The Nite Replacement Sensor Pads for Bed Wetting Control Device is designed for users with incontinence disabilities. This system works in conditioning or training the wearer to wake up to urinate and gradually learn to suppress the urge to do so during the night. The device is to be used with Nite Wet Call Bed Wetting Control Device.
The Nite Train-R for Boys is an incontinence alarm designed for use by males with incontinence or who spend long periods in bed. The unit consists of a small box with an electronic alarm and two reusable moisture sensing pads designed specifically for males. The electronic alarm is activated by only one or two drops of urine. The pad is inserted into the underwear and positioned near the ear. POWER: Uses a 9-volt battery. OPTIONS: Louder response alarms are available. DIMENSIONS Alarm box (HxDxW
The Nite Train-R for Girls is an incontinence alarm designed for use by females with incontinence or who spend long periods in bed. A non-absorbent sensor pad, activated by one or two drops of urine, is worn over the genitals and is held in place with snug fitting underwear. The unit consists of an electronic alarm and two reusable moisture sensing pads designed specifically for females. The pad is inserted into the underwear and the cable is plugged into the alarm box and positioned near the ea
The Nite Train-R Wet Call is an incontinence alarm designed for use by individuals with incontinence or who spend long periods in bed. Made of a combination of Arlon polyethene foam and Lectolite conductive vinyl sheets, this device consists of a small electronic alarm and a moisture sensing pad that is connected to the alarm by a conducting cord. Other features include a built-in alarm volume control switch. The pad is placed either in a king- or queen-sized pillow case or under a dry bed sheet
Portable bed wetting alarm. Solid state transistorized alarm unit worn on wrist. Wire goes up sleeve and down front of shorts. When child wets, activates alarm.
The Rodger Wireless Bedwetting Alarm Starter Kit is designed for users with incontinence disabilities. It is a compact and lightweight transmitter which snaps to unique moisture sensing briefs to detect urine quickly. Transmitter works up to 75 feet.
The Rodger Wireless Bedwetting Alarm Starter Kit is an incontinence alarm designed for users with incontinence disabilities. The alarm kit includes a lightweight transmitter which snaps to unique moisture sensing briefs to detect urine quickly. Transmitter works up to 75 feet.
The Urine and Turn Alert with Bar Graphs, model 1096, is an incontinence alarm and timed reminder signal designed for use with individuals with severe physical disabilities and incontinence. The unit clips to the user's clothing and features a sensor which is placed where wetness is to be expected. When moisture is detected, lights flash indicating the time in 20-minute increments that the wearer has been unchanged. The unit also alerts caregivers in two-, four, and six-hour increments as to whe
The Vibrating Enuresis Alarm, model 1100, is an incontinence alarm designed to vibrate for children who experience incontinence. The continence training device alerts the wearer that the small pad has become wet by vibrating, instead of producing a buzzing sound OPTIONS: Removable probe and probe covers.POWER: Uses 2-AA batteries.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Toilet training device sounds a buzzer to alert child when underwear or diaper is wet. Can also be used to gather data about a child's normal schedule before initiating a toilet training program. Battery operated flood alert device is attached to 2 brass or copper strips. These modified sensors activate a buzzer when the strips come in contact with moisture. The alarm is fastened around the child's waist with a belt. Sensors are taped to the outside of